GF U1000 V2 - Mounting the U1000 V2 on the Pipe; Selecting the Pipe Adapter

Installation Instruction manual
14
8.5 Mounting the U1000 V2 on the pipe
8.5.1 Selecting the pipe adapter
Two adapters are available for attaching the measuring device to pipes with an outside
diameter of ≤ 60 mm.
If these adapters are not necessary, store them away for a possible later change of position.
Outside diameter less than 40 mm – top and bottom pipe adapters (black)
Outside diameter 40 mm – 60 mm – top pipe adapter (black)
Outside diameter more than 60 mm
The adapters are placed on the pipe so that the top pipe adapter engages in the end pieces on
the guide rail.
NOTICE