Need help?Do you have a question about the GFA ELEKTROMAT SE 9.30-25,40 ER and is the answer not in the manual?
General| Brand | GFA |
|---|---|
| Model | ELEKTROMAT SE 9.30-25, 40 ER |
| Category | Gate Opener |
| Language | English |
Defines the intended application of the drive unit for vertically moving sectional doors with full counter-balancing and suitability for indoor use.
Identifies the intended recipients of the installation instructions as qualified persons with expertise in door systems.
Emphasizes ensuring safe operation by following instructions, observing specifications, and reassessing the overall system's safety.
Outlines prerequisites, including not exceeding permissible loads on walls and fastenings, referencing technical data for torques.
Details requirements for connection elements, specifying self-locking elements, hole diameter utilization, and washers for elongated holes.
Illustrates the various permissible mounting positions for the drive unit.
Provides instructions for mounting the drive unit using available threads and selecting appropriate keys for shaft connection.
Details the installation process, including greasing the door shaft and mounting the keys, observing possible variants.
Guides through initial electrical connection steps, including removing covers and inserting motor and limit switch plugs.
Instructs on finalizing electrical installation by mounting cable entries and cable glands.
Specifies checking the gearbox for oil loss and protecting the output shaft against corrosion.
Ensures all connection elements like consoles, torque mounts, and screws are secure and in proper condition.
Verifies connection cables for damage and ensures screw and plug connections have good electric contact.
Confirms final limit positions by opening and closing the door fully, ensuring safety areas are not approached.
Recommends annual checks by a qualified engineer and adherence to regulations for frequently operated doors.
To Next Page