GFI System Specular Reverb V2 User Manual

11
Try this out :
1. Activate SHIMMER mode.
2. Set the Intensity knob to a low setting (about 9 o’clock).
3. Set Blend, Decay, and Damping as desired.
4. Start playing, a low level shimmer effect will be heard on top of the reverbera-
tion.
5. Execute auto intensity sweep.
Here’s another cool one :
1. Activate VOICES mode.
2. Set the Intensity knob to minimum (Unison voice mode).
3. Set Blend, Decay, and Damping as desired.
4. Start playing, the sound is similar to the normal reverb (Unison = no shift).
5. Execute auto intensity sweep.

GFI System Specular Reverb V2 Specifications

Power

current consumption	100 mA
power source	9V DC Adaptor

Electrical Specifications

input impedance	1 MOhm
output impedance	500 Ohm

Weight and Dimensions

weight	0.6 Kg
dimensions	12 (L) x 6.5 (W) x 3.6 (H) cm