To Next PageTo Next Page
Need help?Do you have a question about the GGP ITALY SPA 72 and is the answer not in the manual?
General| Brand | GGP ITALY SPA |
|---|---|
| Model | 72 |
| Category | Lawn Mower |
| Language | English |
Information on obtaining service and maintenance programmes for the machine.
Read instructions, be familiar with controls, use for intended purpose, never allow unauthorized users.
Wear appropriate clothing, inspect the area, refuel safely, check blade and guards before use.
Operate in daylight, avoid wet grass, handle slopes carefully, disengage blade before leaving position.
Keep fasteners tight, store safely, cool engine before storage, keep clean, replace worn parts.
Secure machine on truck or trailer, lower cutting deck, engage parking brake.
Details on the identification plate, including power level, conformity mark, year, serial number, weight.
Explains the functions of key machine components like cutting deck, blade, collector channel, engine.
Instructions on carefully unpacking the machine and its standard packing contents.
Steps for assembling and connecting the battery, securing covers, and charging.
Procedure for fitting the steering wheel onto the shaft using the supplied pin.
Instructions on how to fit the seat onto its mounting plate using screws.
Steps for assembling the grass-catcher frame, attaching canvas, and fitting the handle and stiffening bar.
Description of the steering wheel's function to turn the front wheels.
Regulates engine RPM with positions for CHOKE, SLOW, and FAST.
Lever to stop the machine when parked, engaged by pressing pedal and moving lever.
Key operated control with positions for OFF, ON, and START.
Indicates machine status; flashing means engine is prevented from starting; audible warning for full grass-catcher.
Lever with positions for blade disengaged (A) and blade engaged (B).
Lever with seven positions for adjusting cutting height from 3 to 8 cm.
Pedal with double function: clutch for drive and brake for rear wheels.
Lever with seven positions for forward speeds, neutral, and reverse.
Includes Brake Pedal, Speed Change Lever, and Lever to Release Hydrostatic Drive.
Covers seat adjustment and refueling procedures, checking oil level and filling the tank.
Importance of correct tyre pressure for cutting deck levelling and uniform mowing.
Instructions for fitting the grass-catcher or stone-guard for safety.
Procedure to check safety systems are working properly before each use.
Verifying the machine's braking capacity is adequate for operating conditions.
Checking blade sharpness and secure fixing to prevent poor cut and vibrations.
Steps for starting the engine in a safe area and moving the machine.
Procedures for moving the machine with the blade disengaged and cutting deck raised.
Instructions for braking for mechanical and hydrostatic drive models.
How to engage reverse gear safely for both mechanical and hydrostatic models.
Engaging the blade, forward movement, cutting height adjustment, and obtaining a good cut.
Safety precautions for mowing on slopes, including speed reduction and avoiding certain maneuvers.
Procedure for emptying the grass-catcher, including audible warning and blade disengagement.
Steps to take if the collector channel becomes blocked with grass.
Table detailing conditions under which safety devices prevent starting or stop the engine.
Explanation of the electronic card's self-resetting protector and its function.
Steps for stopping the engine, disengaging the blade, and securing the machine after use.
Instructions for cleaning the machine's exterior, plastic parts, engine, and electrical components.
Procedure for washing the cutting deck interior using a water hose connector.
Guidelines for storing the machine for over a month, including battery and fuel considerations.
Steps to lift the engine cover and secure the cutting deck for access to mechanical parts.
Instructions for draining engine oil using the provided syringe.
Information that the rear axle is permanently lubricated and does not require maintenance.
Importance of battery maintenance, charging before use, and recharging flat batteries.
Details on the function of different fuses and how to replace them.
Procedure for changing front and rear wheels, including snap ring removal and re-fitting.
Information that tyre repairs require a specialized expert for tubeless tyres.
Recommendation to contact a service center for belt replacement due to complexity.
How to adjust the cutting deck using linkages for optimal cutting results.
Procedures for adjusting brakes on mechanical and hydrostatic drive models.
How to adjust drive engagement for mechanical drive models to improve drive ability.
Adjusting spring tension for blade engagement and stopping time.
Guidance on checking blade sharpness, fixing, and balance, advising professional help if needed.
Table outlining maintenance tasks, their frequency (hours), and spaces for recording dates.
Safe procedure for turning the machine onto its side for easier access to underside.
Troubleshooting steps for when the pilot lamp is off and the engine is stopped.
Solutions for when the starter motor is not working and the pilot lamp is on or flashing.
Steps to diagnose and resolve engine starting issues related to fuel or ignition.
Troubleshooting for difficult starting or erratic engine running, often related to fuel issues.
Reasons for weak engine performance, such as high forward speed or cutting height issues.
What to check when the engine stops and the pilot lamp flashes, indicating safety device activation.
Troubleshooting for engine stopping with the pilot lamp going off, often due to electronic card issues.
Possible causes and solutions when the engine stops but the pilot lamp remains illuminated.
Diagnosing and fixing issues causing uneven cuts or poor grass collection.
Identifying causes of unusual vibrations, such as imbalanced blades or loose components.
Improves stability on sloping ground.
Used in place of the grass-catcher when cuttings are not to be collected.
For keeping the battery in good working order during storage.
Chops grass cuttings finely and leaves them on the lawn.
Details on the electrical system voltage and battery capacity.
Specifications for front and rear tyres, tyre pressure, and machine weight.
Information on inside turning circle, cutting height, and cutting width.
Forward speeds and reverse speed for mechanical drive models.
Forward and reverse speeds for hydrostatic drive models.
