GGP ITALY SPA 90 User Manual (English)

Questions and Answers:

F
figueroaandrewJul 29, 2025
How to fix uneven cut and poor grass collection with GGP ITALY SPA 90 Lawn Mower?
- D
  Douglas KellerJul 29, 2025
  If your GGP ITALY SPA Lawn Mower is producing an uneven cut and poor grass collection, start by checking the tyre pressure to ensure the cutting deck is parallel to the ground. You may also need to realign the cutting deck. If the forward speed is too high compared to the height of the grass, reduce the forward speed and/or raise the cutting deck. If the grass is wet, wait for it to dry. Finally, if the collector channel is blocked, remove the grass-catcher and empty the collector channel.
L
Lisa HartmanAug 7, 2025
Why is starting difficult or the engine runs erratically on my GGP ITALY SPA 90?
- D
  danielleeAug 7, 2025
  If you are experiencing difficulty starting your GGP ITALY SPA Lawn Mower or the engine is running erratically, it could be due to a fault in carburation, so clean or replace the air filter. Other possible causes include stale fuel, so empty the fuel tank and refill it with fresh fuel. Also, check and replace the fuel filter if necessary.
A
Amy DrakeAug 11, 2025
What to do if the starter motor runs but the engine doesn't start on my GGP ITALY SPA 90 Lawn Mower?
- S
  Shane Patterson MDAug 11, 2025
  If, when the key is on «START», the starter motor runs but the engine does not start on your GGP ITALY SPA Lawn Mower, it could be due to an insufficiently charged battery, so recharge the battery. Another cause could be a faulty fuel supply, so check the level in the tank and open the fuel stopcock (if present). Also, check the fuel filter. It may also be due to faulty ignition, so check that the spark plug cap is securely fitted and that the electrodes are clean and have the correct gap.
M
Matthew ParkAug 15, 2025
Why is there poor engine performance during cutting with my GGP ITALY SPA 90 Lawn Mower?
- M
  melodyspencerAug 15, 2025
  If your GGP ITALY SPA Lawn Mower experiences poor engine performance during cutting, it may be due to the forward speed being too high compared to the cutting height. Reduce the forward speed and/or raise the cutting deck to resolve this issue.
R
Robert ThomasAug 19, 2025
Why is my GGP ITALY SPA Lawn Mower having unusual vibrations while working?
- M
  Mr. David BradshawAug 19, 2025
  If you notice unusual vibrations while operating your GGP ITALY SPA Lawn Mower, it could be that the cutting deck is full of grass; clean the cutting deck. Alternatively, check and tighten all the engine and frame bolts, as they may be loose.
S
Shawn HernandezAug 25, 2025
What to do if the starter light comes on but the starter motor doesn't run on my GGP ITALY SPA 90 Lawn Mower?
- A
  ashley83Aug 25, 2025
  If the starter light comes on but the starter motor does not run on your GGP ITALY SPA Lawn Mower when the key is on «START», it could be due to an insufficiently charged battery, so recharge the battery. It could also be that the battery charger fuse is blown, so replace the fuse (25 A).

GGP ITALY SPA 90 Specifications

General

Brand	GGP ITALY SPA
Model	90
Category	Lawn Mower
Language	English

Summary

1. SAFETY

1.1 HOW TO READ THE MANUAL

Explains how to interpret special markings and symbols used in the manual for important information.

1.2 GENERAL SAFETY REGULATIONS

Outlines crucial safety rules for operating the machine safely and preventing accidents.

1.3 SAFETY LABELS

Details the meaning of various safety labels placed on the machine for user awareness.

1.4 REGULATIONS FOR TOWING

Provides specific rules and safety instructions for towing a trailer with the machine.

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS

2.1 IDENTIFICATION OF THE MACHINE

Explains the information found on the machine's identification label.

2.2 IDENTIFICATION OF MAIN COMPONENTS

Identifies and describes the main functional parts of the lawn tractor.

3. UNPACKING AND ASSEMBLY

3.1 UNPACKING

Instructions for carefully removing the machine and its parts from the packaging.

3.2 FITTING THE STEERING WHEEL

Step-by-step guide on how to attach the steering wheel to the machine.

3.3 FITTING THE SEAT

Instructions for mounting the operator's seat onto the designated plate.

3.4 MOUNTING THE FRONT BUMPER

Steps for attaching the optional front bumper to the machine's frame.

3.5 ACTIVATING AND CONNECTING THE BATTERY

Detailed procedure for activating and connecting the machine's battery.

4. CONTROLS AND INSTRUMENTS

4.1 STEERING WHEEL

Describes the function of the steering wheel in controlling the front wheels.

4.2 THROTTLE

Explains how the throttle lever regulates engine RPMs and its various positions.

4.3 KEY IGNITION SWITCH

Details the different positions of the ignition switch for starting and operating the engine.

4.4 PARKING BRAKE

Explains how to engage and disengage the parking brake mechanism.

4.5 HEADLIGHT SWITCH

Instructions for operating the headlights, if fitted on the machine.

4.6 PILOT LAMP AND SOUND WARNINGS

Describes the function of warning lamps and audible signals for machine status.

4.7 BLADE ENGAGEMENT AND BRAKE CONTROL

Explains the operation of the switch that engages/disengages blades and activates the brake.

4.8 CUTTING HEIGHT ADJUSTMENT LEVER

Details how to adjust the cutting deck height using the dedicated lever.

4.9 LEVER FOR TIPPING THE GRASS-CATCHER

Instructions on how to use the lever to empty the grass catcher.

4.21 CLUTCH / BRAKE PEDAL

Explains the dual function of this pedal for clutch and braking.

4.22 SPEED CHANGE LEVER

Describes the operation of the gear shift lever for selecting speeds.

4.31 BRAKE PEDAL

Explains the function of the brake pedal in hydrostatic transmission models.

4.32 DRIVE PEDAL

Details how the drive pedal controls forward and reverse speeds.

4.33 HYDROSTATIC TRANSMISSION DISENGAGEMENT LEVER

Explains how to disengage the hydrostatic transmission for manual movement.

5. HOW TO USE THE MACHINE

5.1 SAFETY RECOMMENDATIONS

Crucial safety advice for operating the machine, emphasizing user responsibility and hazard awareness.

5.2 WHY THE SAFETY DEVICES CUT IN

Explains how the machine's safety interlocks prevent starting or stop the engine.

5.3 DIRECTIONS BEFORE STARTING WORK

Essential checks and preparations required before beginning mowing operations, including seat adjustment, tyre pressure, and refueling.

5.4 USING THE MACHINE

General guidance on operating the machine for various tasks, including starting, driving, braking, and cutting.

5.5 USING THE MACHINE ON SLOPING GROUND

Specific safety advice and techniques for operating the machine on inclines.

5.6 TRANSPORTING

Safety instructions and procedures for transporting the machine.

5.7 LAWN MAINTENANCE

Tips and guidelines for maintaining a healthy and attractive lawn.

6. MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

Essential safety precautions to observe before and during maintenance work.

6.2 PROGRAMMED MAINTENANCE

A schedule outlining recommended maintenance operations and their frequencies.

6.2.1 Summary of main situations where servicing operation may be required

Troubleshooting guide for common issues requiring dealer intervention.

6.2.2 Engine

Guidance related to engine maintenance, referencing the engine manual.

6.2.3 Rear axle

Information on the maintenance-free nature of the rear axle.

6.2.4 Battery

Instructions for proper battery maintenance and charging.

6.3 CHECKS AND ADJUSTMENTS

Procedures for performing checks and making necessary adjustments to the machine.

6.3.1 Cutting deck alignment

Detailed steps for aligning the cutting deck for optimal cutting performance.

6.4 DISMANTLING AND REPLACEMENT

Instructions for taking apart and replacing various machine components.

6.4.1 Replacing wheels

Procedure for removing and replacing the machine's wheels.

6.4.2 Replacing and repairing the tyres

Information on tire maintenance and repair.

6.4.3 Replacing the bulbs

Instructions for replacing light bulbs, if fitted.

6.4.4 Replacing a fuse

Steps for replacing blown fuses in the machine's electrical system.

6.5 INFORMATION FOR SERVICE CENTRES

Guidance for service centers regarding adjustments and blade procedures.

6.5.1 Adjustments

Specifications and procedures for various machine adjustments.

6.5.2 Dismantling, replacing and remounting the blades

Detailed instructions for blade maintenance and replacement.

8. ACCESSORIES ON REQUEST

FRONT COUNTERWEIGHTS

Describes the purpose of front counterweights for stability.

STONE-GUARD KIT

Explains the use of the stone-guard kit as an alternative to the grass-catcher.

TOWING HITCH

Information about the towing hitch accessory for trailers.

CLOTH COVER

Details the cloth cover for protecting the machine when stored.

"CB01" MAINTENANCE BATTERY-CHARGER

Describes the battery charger for maintaining battery health.

“MULCHING” KIT

Information about the mulching kit for leaving clippings on the lawn.

9. SPECIFICATIONS

Electrical system

Specifies the voltage and capacity of the electrical system and battery.

Front tyres

Lists the specifications for the front tyres.

Rear tyres

Lists the specifications for the rear tyres.

Front tyre pressure

Indicates the correct inflation pressure for the front tyres.

Rear tyre pressure

Indicates the correct inflation pressure for the rear tyres.

Overall weight

States the machine's total weight.

Inside turning circle

Specifies the minimum turning diameter of the machine.

Cutting height

Range of adjustable cutting heights for the machine.

Cutting width

The effective width of the cutting deck.

Mechanical transmission

Technical specifications for mechanical transmission models.

Hydrostatic transmission

Technical specifications for hydrostatic transmission models.

Related product manuals

GGP ITALY SPA 98S

50 pages

GGP ITALY SPA SD 98 Series

GGP ITALY SPA 102-122

59 pages

GGP ITALY SPA NP 534 TR

104 pages

GGP ITALY SPA NP 534 W TR

104 pages

GGP ITALY SPA ES/ESL 464 TR

120 pages

GGP ITALY SPA ML 534 TR/TR-E

72 pages

GGP ITALY SPA EPL 424 Series

180 pages

GGP ITALY SPA ES/ESL 534 TR-E

120 pages

GGP ITALY SPA ES/ESL 464 TR-E

120 pages

GGP ITALY SPA 90 User Manual

Table of Contents

Questions and Answers:

GGP ITALY SPA 90 Specifications

Summary

1. SAFETY

1.1 HOW TO READ THE MANUAL

1.2 GENERAL SAFETY REGULATIONS

1.3 SAFETY LABELS

1.4 REGULATIONS FOR TOWING

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS

2.1 IDENTIFICATION OF THE MACHINE

2.2 IDENTIFICATION OF MAIN COMPONENTS

3. UNPACKING AND ASSEMBLY

3.1 UNPACKING

3.2 FITTING THE STEERING WHEEL

3.3 FITTING THE SEAT

3.4 MOUNTING THE FRONT BUMPER

3.5 ACTIVATING AND CONNECTING THE BATTERY

4. CONTROLS AND INSTRUMENTS

4.1 STEERING WHEEL

4.2 THROTTLE

4.3 KEY IGNITION SWITCH

4.4 PARKING BRAKE

4.5 HEADLIGHT SWITCH

4.6 PILOT LAMP AND SOUND WARNINGS

4.7 BLADE ENGAGEMENT AND BRAKE CONTROL

4.8 CUTTING HEIGHT ADJUSTMENT LEVER

4.9 LEVER FOR TIPPING THE GRASS-CATCHER

4.21 CLUTCH / BRAKE PEDAL

4.22 SPEED CHANGE LEVER

4.31 BRAKE PEDAL

4.32 DRIVE PEDAL

4.33 HYDROSTATIC TRANSMISSION DISENGAGEMENT LEVER

5. HOW TO USE THE MACHINE

5.1 SAFETY RECOMMENDATIONS

5.2 WHY THE SAFETY DEVICES CUT IN

5.3 DIRECTIONS BEFORE STARTING WORK

5.4 USING THE MACHINE

5.5 USING THE MACHINE ON SLOPING GROUND

5.6 TRANSPORTING

5.7 LAWN MAINTENANCE

6. MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

6.2 PROGRAMMED MAINTENANCE

6.2.1 Summary of main situations where servicing operation may be required

6.2.2 Engine

6.2.3 Rear axle

6.2.4 Battery

6.3 CHECKS AND ADJUSTMENTS

6.3.1 Cutting deck alignment

6.4 DISMANTLING AND REPLACEMENT

6.4.1 Replacing wheels

6.4.2 Replacing and repairing the tyres

6.4.3 Replacing the bulbs

6.4.4 Replacing a fuse

6.5 INFORMATION FOR SERVICE CENTRES

6.5.1 Adjustments

6.5.2 Dismantling, replacing and remounting the blades

8. ACCESSORIES ON REQUEST

FRONT COUNTERWEIGHTS

STONE-GUARD KIT

TOWING HITCH

CLOTH COVER

"CB01" MAINTENANCE BATTERY-CHARGER

“MULCHING” KIT

9. SPECIFICATIONS

Electrical system

Front tyres

Rear tyres

Front tyre pressure

Rear tyre pressure

Overall weight

Inside turning circle

Cutting height

Cutting width

Mechanical transmission

Hydrostatic transmission

Related product manuals