To Next PageTo Next Page
Need help?Do you have a question about the GGP ITALY TC 102-122 and is the answer not in the manual?
General| Brand | GGP ITALY |
|---|---|
| Model | TC 102-122 |
| Category | Lawn Mower |
| Language | English |
Operator training and initial machine familiarization instructions.
Pre-operation checks, safety, and refuelling procedures.
Safe operation guidance, including slope use and general precautions.
Guidelines for cleaning, maintenance, and proper machine storage.
Instructions for safe transport of the machine on trucks or trailers.
Guidelines for environmental responsibility during use and disposal.
Overview of machine, components, and intended use.
Specifies consumer, non-professional, DIY use for the machine.
Details hazardous usage causing harm, damage, or warranty invalidation.
Describes identification label and main machine components.
Emphasizes safety labels and their meanings for safe operation.
Instructions for carefully unpacking the machine and its parts.
Step-by-step guide for assembling the steering wheel.
Instructions for installing and adjusting the operator's seat.
Steps for placing and correctly connecting the battery.
Guide to attaching grass catcher brackets to the frame.
Instructions to remove a stop for transport before fitting brackets.
Steps for mounting the front bumper, if provided.
Detailed instructions for assembling the grass catcher.
Describes steering wheel function in controlling front wheels.
Explains choke for enriching fuel mixture during cold starts.
Details throttle lever for regulating engine RPM and its positions.
Explains key ignition switch function and its three positions.
Describes parking brake lever and its two positions for securing the machine.
Instructions for turning on the headlights.
Explains dashboard indicator lights and audible warning signals.
Details hour counter tracking engine operating time.
Explains engaging/disengaging cutting means via electromagnetic clutch.
Describes lever for adjusting cutting height across seven positions.
Explains lever used to tip and empty the grass catcher.
Describes button for reverse gear with cutting means active.
Details brake pedal for operating rear wheel brakes.
Explains clutch pedal for controlling speed and engaging drive.
Describes lever to disengage transmission for manual movement.
Important safety advice for operating, especially on slopes.
Explains how safety devices prevent starting or stop the engine.
Essential checks and operations before starting for safety and efficiency.
Instructions for adjusting seat position for comfort and control.
Importance of correct tyre pressure for even cutting and stability.
Procedures for checking oil and filling fuel, with safety warnings.
Instructions for fitting grass catcher or rear discharge guard.
How to check safety devices, brakes, and cutting means before use.
Comprehensive guide on operating the machine for various tasks.
Step-by-step guide for starting the engine.
How to move the machine without engaging cutting means.
Procedures for slowing down and stopping the machine.
Instructions for engaging reverse gear safely.
Guide on cutting grass, including adjustments and slope operation.
How to safely empty grass catcher when it is full.
Steps to clear blockages in the collector channel.
Procedures after finishing mowing operations.
Steps to safely stop the machine and engine.
Guide to cleaning the machine after use, including safety warnings.
Instructions for storing the machine for extended periods.
Information on circuit board protection and warning lights.
Specific safety advice and techniques for operating on slopes.
Tips for maintaining a nice lawn via proper cutting techniques.
Safety warnings for malfunctions and seeking professional service.
Schedule and guide for routine maintenance tasks.
Instructions for engine maintenance, including oil changes.
Note on sealed rear axle not requiring maintenance.
Guidance on battery maintenance for longevity and proper charging.
Procedures for specific machine adjustments and repairs.
How to adjust cutting-means assembly for an even cut.
Steps for replacing machine wheels.
Advice on tyre repair or replacement.
Instructions for replacing incandescent and LED bulbs.
Guide to replacing blown fuses, emphasizing correct type.
Procedures for handling, replacing, and reassembling cutting means.
How to adjust spring tension for grass catcher hook.
Describes rear discharge guard used instead of grass catcher.
Information about the towing kit for trailers.
Describes cloth cover for protecting machine from dust.
Details battery charger for maintaining battery health during storage.
Explains mulching kit for chopping and leaving grass cuttings on lawn.
Information on snow chains for improved traction.
Use of trailer for transporting tools and objects.
Use of sprinkler for salt or fertilisers.
Use of shredder for cutting and shredding weeds.
Use of front sweeper for cleaning paths and surfaces.
Use of lawn roller to compact soil or flatten grass.
Use of snow shovel for clearing snow.
Use of lifting interface for supplementary attachments.
Explains PTO for transferring engine power to attachments.
