ghd helios HE001 User Manual

65
EN
Cool Shot Button: The Cool Shot Button can be
switchedonatanysetting.It’sidealtoxyourstyle
and shape your look.
Nozzles: A concentrator nozzle can be used to
achieve better styling control through concentrating
theairow.
Note:Thetofacoldnozzlecanbetight,
particularly when the dryer and nozzle are new.
The upper switch on the back of the handle is for
temperature setting:
= Maximum heat
= Medium heat
= Cold air
The lower switch on the back of the handle is to set
the fan speed:
= Max Speed
= Medium Speed
=O
Any temperature and speed setting can be
combined. The Ionic Technology function is
always on.
Always inspect your ghd hairdryer before use, and do
not use it if it is damaged. If the power cord or plug is
damaged it must be replaced by Jemella Ltd. Jemella Ltd
will replace the product free of charge only if it is within
warranty.
To reduce the risk of electrocution:
1. Do not use if the cord is damaged.
2. Do not pull or strain the power cord and do not unplug by pulling on the cord, rather
disconnect the ghd hairdryer by isolating the mains switch and then by removing the plug.
3. Do not use an electrical extension lead in conjunction with the ghd hairdryer.
4. IMPORTANT:Thisghdhairdryerisdesignedfor220-240V,50-60Hz. Do not
usewithanyotherpowersuppliesotherthanthatspeciedontheratingplate.
Always check that the voltage of your electricity supply matches
the voltage of your ghd hairdryer.
5.Do not use this product with a voltage inverter or any device designed to convert
theelectricalsupplyto240Vfromadierentsource.
6. Your ghd product is a class II electrical appliance.
7. Any error when connecting the ghd hairdryer can cause irreparable harm, not covered
by the guarantee.
The ghd hairdryer must be unplugged from the mains socket;
1. Before cleaning and maintenance procedures.
2. If it is not working correctly.
3. Assoonasyouhavenishedusingit.
4. If you leave the room, even momentarily.
The ghd hairdryer is equipped with a heat-sensitive safety cut out device. In the event of
overheating(forexampleiftherearlterisblocked),thedryer’sheaterwillstopautomatically.
This will cause the temperature of the heater to become cold and hot intermittently. Isolate the
dryerfromthemainssupplyandcleanthelter.Ifproblemspersist,contactghd(JemellaLtd),
see contact details.
If your ghd hairdryer has broken or does not work correctly immediately stop using and contact
ghd (Jemella Ltd), see contact details.
Yourghdhairdryercanonlyberepairedusingspecialisttoolsandbyqualiedexpertsatghd.
CAUTION: Failure to comply with these safety precautions may result in electric shock or
other injuries!
using your ghd hairdryer
For indoor use only
1. After washing your hair, towel-dry it thoroughly.
2. Do not allow excess water from your hair or any other source to come into contact with the ghd hairdryer.
3. Holdtheghdhairdryerbythehandle;donotholdbythecasingorconcentratornozzle,whichcanbehot.
4. For fast drying, use the ghd hairdryer without the styling nozzle.
5.Take care to avoid the hot surface of the ghd hairdryer coming into direct contact with the skin, in particular
the eyes, ears, face and neck.
6. Never cover the blower or intake opening.
7. Ensurethattheairinletlterisnotanddoesnotbecomeblockedwithuorhair.
8. Whendryingorstyling,donotallowanyofyourhairtocoverorcomeintocontactwiththeairinletlterat
the back of your dryer.
9. Never place the ghd hairdryer on any heat sensitive surface or cover it whilst in or immediately after use.
10. Ensure that no hairstyling products are drawn into the appliance.
Helios - CDST-7 - 99200001532.indd 5-6 03-Nov-20 6:42:55 PM

ghd helios HE001 Specifications

General

Brand	ghd
Model	helios HE001
Category	Hair Dryer
Language	English