Need help?Do you have a question about the GHL KH Director and is the answer not in the manual?
General| Manufacturer | GHL |
|---|---|
| Model | KH Director |
| KH range | 0 - 20 dKH |
| Compatibility | GHL ProfiLux |
| Connectivity | USB |
| Power consumption | 5W |
| Interfaces | ProfiLux Aquatic Bus (PAB) |
| Measuring principle | Titration |
| Reagent consumption | 1 ml per measurement |
| Measurement interval | Adjustable |
| pH range | Not applicable |
| Number of pumps | 3 |
| Function | Automated KH (Carbonate Hardness) measurement and control |
Guidelines for the safe use of the KH Director by children and vulnerable persons.
Defines the KH Director's intended purpose and limitations for domestic use.
Explains the manual's scope and lists the KH Director's key components and ports.
Details the items included in the KH Director package.
Provides crucial guidelines for safe and correct operation of the device.
Illustrates and describes all connection ports on the KH Director.
Details the required control units for operating the KH Director.
Explains the meaning of the status LEDs on the KH Director.
Details the operational principle and fluid transfer mechanism of the KH Director.
Describes how to select and assign dosing pumps for KH measurement in GCC.
Steps for activating and setting up the dosing pumps for KH measurement.
Guide to selecting the appropriate sample volume for KH measurement.
Instructions for entering the sample tube volume for accurate measurement.
Details how to perform KH value measurements, both manual and automatic.
Steps required before the initial KH measurement, including venting and flushing.
Step-by-step guide for performing a manual KH measurement.
Instructions for setting up automated daily KH measurements with a time schedule.
Explains how to use dosing pumps to control KH value based on measurement differences.
Details the 'Add-On' mode for controlling KH by adjusting dosing pump quantities.
Describes the 'Adaptive' mode for controlling KH via percentage variation in dosing.
Explains how to control KH using pH control of a calcium reactor.
Discusses the practical implications of measurement tolerances and accuracy.
Compares KH Director's accuracy with other conventional measurement methods.
Guidance on device maintenance and replacement of wear parts.
Provides resources for obtaining help and further information.
Instructions and considerations for updating the KH Director's firmware.
To Next Page