Need help?Do you have a question about the Giagni TDTF and is the answer not in the manual?
General| Brand | Giagni |
|---|---|
| Model | TDTF |
| Category | Plumbing Product |
| Language | English |
Instructions for installing handle hubs onto hot/cold cartridges.
Procedure for attaching deck elbows to union nuts on the faucet body.
Guide for inserting the faucet through tub rim holes and securing it.
Steps for cutting and connecting U-FSUP supply lines to the faucet.
Instructions for attaching the handshower holder and hose.
Procedure for turning on water and checking for leaks.
Guide for screwing handle hubs onto valve stems and installing handles.
Steps for connecting the stop valve to a coupling below the floor.
Procedure for connecting the U-FSUP supply line to the stop valve.
Instructions for installing handle hubs onto hot/cold cartridges.
Procedure for attaching hot and cold risers to the faucet body.
Steps for attaching the handshower holder to the diverter outlet.
Guide for drilling floor holes for water supplies, considering support brackets.
Instructions for attaching the U-SBRC support bracket to risers.
Steps for sliding escutcheons and screwing floor flanges onto risers.
Guide for securing floor flanges and sliding escutcheons to cover them.
Instructions for attaching the handshower hose to the holder and handshower.
Procedure for connecting pipe, making water connections, and testing.
Steps for assembling the bracket and sliding it onto the faucet risers.
Instructions for bending the metal strap to create a clamp around the drain.
Instructions for installing handle hubs onto hot/cold cartridges.
Guide for roughing-in wall elbows flush to the finished wall.
Procedure for screwing the decorative flange onto the rough portion.
Steps for attaching the faucet by screwing union nuts onto wall elbows.
Instructions for attaching the handshower holder and hose.
Procedure for turning on water and checking all connections for leaks.
To Next Page