Gigabyte AORUS CO49DQ - Using the Device; Power On;Off

- 6 -
USING THE DEVICE
TurningthePowerOn/Off
PowerOn
1. Connect one end of the power cable to the AC IN jack at the rear of the monitor.
2. Connect other end of the power cable to a power outlet.
3. Press the Control button to turn on the monitor. The Power LED will light in
white, indicating the monitor is ready to use.
PowerOff
Press the Control button for 2 seconds to turn off the monitor.
Note: When the Main menu appears on the screen, you can also turn off the monitor
by moving the Control button down ( ) and selecting “Power Off”. Refer to page 9.
PreparingyourMonitorforWall-Mounting
Note: Use only a 100 x 100 mm VESA compatible wall mount kit to mount the
monitor on the wall. Refer to the installation guide included in the wall-mount
bracket kit. VESA mounting screw size: M4 x 10mm minimum.