■ SPD Setup: You can find this option under the Advanced Memory Settings menu. The user can
now write 2 custom profiles in the SPD. Basically, you can now write your own XMP and use it every
time without having to type all the settings one by one after each reset.
Even on memory kits without XMP, the user can still use those 2 empty profiles to make his own
profile or copy some of the predefined profiles.
Using the options at the bottom and by clicking “Set” you can write or clear the profiles on your
memory sticks.
In order for the profiles to be written or cleared you need to save and exit from the bios and on the
next reboot the extra profiles will show up at the Extreme Memory Profile(X.M.P.) option.
Make sure that you set the “Memory Boot Mode” to “Disable Fast Boot” for SPD Setup to work
correctly.
We’ve added Save and Load Profile options so you can save or load a profile that you made in a USB
drive and share it with other users in the internet! Sharing is caring!!
To Previous Page
Loading...
