Gigabyte B460M DS3H AC - Connectivity and Interface Details; Storage, USB, and Internal Connectors

Storage Interface  1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/
x2 SSD support)
 6 x SATA 6Gb/s connectors
 SupportforRAID0,RAID1,RAID5,andRAID10
 * Referto"1-7InternalConnectors,"fortheinstallationnoticesfortheM.2andSATA
connectors.
 Intel
®
Optane
™
MemoryReady
USB  Chipset:
- 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
- 2 x USB 2.0/1.1 ports on the back panel
 Chipset+USB 2.0 Hub:
- 4 x USB 2.0/1.1 ports available through the internal USB headers
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 8-pin ATX 12V power connector
 1 x CPU fan header
 2 x system fan headers
 2 x addressable LED strip headers
 2xRGBLEDstripheaders
 6 x SATA 6Gb/s connectors
 1 x M.2 Socket 3 connector
 1 x front panel header
 1 x front panel audio header
 1 x USB 3.2 Gen 1 header
 2 x USB 2.0/1.1 headers
 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only)
 2 x serial port headers
 1 x Clear CMOS jumper
Back Panel
Connectors
 1 x PS/2 keyboard/mouse port
 1 x D-Sub port
 1 x DVI-D port
 1 x HDMI port
 4 x USB 3.2 Gen 1 ports
 2 x USB 2.0/1.1 ports
 1xRJ-45port
 2xSMAantennaconnectors(1T1R)
 3 x audio jacks
I/O Controller  iTE
®
I/O Controller Chip
- 7 -
Only for the B460M DS3H. Only for the B460M DS3H AC.