Gigabyte B560 DS3H AC - Expansion Slots; Storage Interface; USB; Internal Connectors

Expansion Slots  1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed,
be sure to install it in the PCIEX16 slot.
(The PCIEX16 slot conforms to PCI Express 4.0 standard.)
(Note)
 4 x PCI Express x16 slots, running at x1 (PCIEX1_1~4)
(The PCIEX1 slot conforms to PCI Express 3.0 standard.)
Storage Interface  CPU:
- 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2
SSD support) (M2P_CPU)
(Note)
 Chipset:
- 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 3.0 x4/x2
SSD support) (M2A_SB)
- 6 x SATA 6Gb/s connectors
 Intel
®
Optane
™
Memory Ready
* System acceleration with Intel
®
Optane
™
Memory can only be enabled on the
M2P_CPU connector and with an 11th Generation Intel
®
processor installed.
USB  Chipset:
- 1 x USB Type-C
®
port with USB 3.2 Gen 1 support, available through the
internal USB header
- 3 x USB 3.2 Gen 1 ports (1 ports on the back panel, 2 ports available through
the internal USB header)
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
 Chipset+USB 3.2 Gen 1 Hub:
- 1 x USB Type-C
®
port on the back panel, with USB 3.2 Gen 1 support
- 2 x USB 3.2 Gen 1 ports on the back panel
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 8-pin ATX 12V power connector
 1 x CPU fan header
 3 x system fan headers
 1 x addressable LED strip header
 1 x RGB LED strip header
 2 x M.2 Socket 3 connectors
 6 x SATA 6Gb/s connectors
 1 x front panel header
 1 x front panel audio header
 1 x USB 3.2 Gen 1 header
 1 x USB Type-C
®
header, with USB 3.2 Gen 1 support
 2 x USB 2.0/1.1 headers
 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only)
 1 x Clear CMOS jumper
 1 x Q-Flash Plus button
- 7 -