Gigabyte C246-WU4 - Page 30

& CaseOpen
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To
clear the chassis intrusion status record, set ResetCaseOpenStatus to Enabled, save the settings to
the CMOS, and then restart your system.
& CPUVcore/CPUVCCSA/CPUVCCIO/DDRVTTChannelA/BVoltage/DRAMChannelA/B
Voltage/DDRVPPChannelA/BVoltage/+3.3V/+5V/PCHCore/+12V/CPUVAXG
Displays the current system voltages.
& CPU/System1/System2/PCH/PCIEX16/VRMMOS/PCIEX8/EC_TEMP1/EC_TEMP2
Displays current temperature.
& CPU/CPUOPT/SystemFanSpeed
Displays current fan speeds.
& CPU/System1/System2/PCH/PCIEX16/VRMMOS/PCIEX8/EC_TEMP1/EC_TEMP2
TemperatureWarning
Sets the warning threshold for CPU/system/Chipset temperature. When temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F,
90
o
C/194
o
F.
& CPU/CPUOPT/SystemFanFailWarning
Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan condition
or fan connection when this occurs. (Default: Disabled)
& CPUFanControlMode(CPU_FANConnector)
Auto Lets the BIOS automatically detect the type of fan installed and sets the optimal control
mode. (Default)
Voltage Voltage mode is recommended for a 3-pin fan.
PWM PWM mode is recommended for a 4-pin fan.
& CPUFanSpeedControl(CPU_FANConnector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal Allows the fan to run at different speeds according to the CPU temperature. You
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the FanSpeedPercentage item.
Full Speed Allows the fan to run at full speeds.
& FanSpeedPercentage
 Allowsyoutocontrolthefanspeed.ThisitemiscongurableonlywhenCPUFanSpeedControl is set
to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
& FanControlUseTemperatureInput
Allows you to select the reference temperature for fan speed control. (Default: CPU)
& Temperature Interval
Allows you to select the temperature interval for fan speed change. (Default: 1)
& CPUOPTFanControlMode(CPU_OPTConnector)
Auto Lets the BIOS automatically detect the type of fan installed and sets the optimal control
mode. (Default)
Voltage Voltage mode is recommended for a 3-pin fan.
PWM PWM mode is recommended for a 4-pin fan.
& CPUOPTFanSpeedControl(CPU_OPTConnector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal Allows the fan to run at different speeds according to the CPU temperature. You
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the FanSpeedPercentage item.
Full Speed Allows the fan to run at full speeds.
- 30 -