EasyManua.ls Logo

Gigabyte C246N-WU2 - Page 7

Gigabyte C246N-WU2
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USB Chipset:
- 1 x USB 3.1 Gen 2 Type-A ports (red) on the back panel
- 1 x USB Type-C
port on the back panel, with USB 3.1 Gen 2 support
- 6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
Internal
Connectors
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
1 x M.2 Socket 3 connector
4 x SATA 6Gb/s connectors
2xSATADetectionHeaders(SATA_SGP1/2)
1 x SATA power connector
1 x CPU fan header
2 x system fan headers
1 x front panel header
1 x front panel audio header
1 x USB 3.1 Gen 1 header
1xS/PDIFOutheader
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
1 x serial port header
1 x speaker header
1 x Clear CMOS jumper
1 x chassis intrusion header
Back Panel
Connectors
1xD-Subport
1xHDMIport
1xDisplayPort
1 x USB 3.1 Gen 2 Type-A port (red)
1 x USB Type-C
port, with USB 3.1 Gen 2 support
4 x USB 3.1 Gen 1 ports
2xRJ-45ports
2 x audio jacks
I/O Controller iTE
®
I/O Controller Chip
Hardware
Monitor
Voltage detection
Temperature detection
Fan speed detection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you
install.
BIOS 1x128Mbitash
Use of licensed AMI UEFI BIOS
PnP1.0a,DMI2.7,WfM2.0,SMBIOS2.7,ACPI5.0
- 7 -

Related product manuals