Gigabyte G1.Sniper 5 - Page 38

BIOS Setup
- 38 -
` Advanced Frequency Settings
& Performance Boost
(Note)
Provides you with ve different overclocking congurations. Options are: Medium, High, Turbo, Ultra,
Extreme. (Default: Auto)
& CPU Base Clock
Allows you to manually set the CPU base clock in 0.01 MHz increments. (Default: Auto)
Important: It is highly recommended that the CPU frequency be set in accordance with the CPU
specications.
& Host/PCIe Clock Frequency
(Note)
Allows you to manually set the host clock frequency (which controls CPU, PCIe, and memory frequencies)
in 0.01 MHz increments. This item is congurable only when CPU Base Clock is set to Manual.
& Processor Base Clock (Gear Ratio)
(Note)
Allows you to congure the Processor Base Clock by multiplying the Host/PCIe Clock Frequency by
several preset host clock multipliers. This item is congurable only when CPU Base Clock is enabled.
& Host Clock Value
This value is determined by multiplying the Host/PCIe Clock Frequency value by the Processor Base
Clock(Gear Ratio) value.
& Processor Graphics Clock
Allows you to set the onboard graphics clock. The adjustable range is from 400 MHz to 4000 MHz. (Default:
Auto)
& CPU Upgrade
(Note)
Allows you to set the CPU frequency. Options may vary depending on the CPU being used. (Default: Auto)
& CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being installed.
(Note) This item is present only when you install a CPU that supports this feature. For more information about
Intel
®
CPUs' unique features, please visit Intel's website.