Gigabyte G1.Sniper Z97 - Advanced Frequency Settings

- 37 -
BIOS Setup
` Advanced Frequency Settings
& Performance Upgrade
(Note)
 Providesyouwithvedifferentoverclockingcongurations.Optionsare:20%Upgrade,40%Upgrade,
60%Upgrade,80%Upgrade,100%Upgrade.(Default:Auto)
& CPU Base Clock
 AllowsyoutomanuallysettheCPUbaseclockin0.01MHzincrements.(Default:Auto)
Important: It is highly recommended that the CPU frequency be set in accordance with the CPU
specications.
& Host/PCIe Clock Frequency
(Note)
 Allowsyoutomanuallysetthehostclockfrequency(whichcontrolsCPU,PCIe,andmemoryfrequencies)
in0.01MHzincrements.
 ThisitemiscongurableonlywhenCPU Base Clock is set to Manual.
& Processor Base Clock (Gear Ratio)
(Note)
 AllowsyoutoconguretheProcessorBaseClockbymultiplyingtheHost/PCIe Clock Frequency by several
presethostclockmultipliers.ThisitemiscongurableonlywhenCPU Base Clock is set to Manual.
& Spread Spectrum Control
(Note)
 EnablesordisablesCPU/PCIeSpreadSpectrum.(Default:Auto)
& Host Clock Value
This value is determined by multiplying the Host/PCIe Clock Frequency value by the Processor Base
Clock (Gear Ratio) value.
& Processor Graphics Clock
 Allowsyoutosettheonboardgraphicsclock.Theadjustablerangeisfrom400MHzto4000MHz.(Default:
Auto)
& CPU Upgrade
(Note)
 AllowsyoutosettheCPUfrequency.OptionsmayvarydependingontheCPUbeingused.(Default:Auto)
(Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.Formoreinformationabout
Intel
®
CPUs' unique features, please visit Intel's website.