Gigabyte G1.Sniper - Page 45

- 45 - BIOS Setup
>>> CPU
Load-Line Calibration
Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En-
abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
(Default: Auto)
Standard  DisablesLoad-LineCalibrationandsetsVDroopfollowingIntelspecications.
Level 1 Enables Load-Line Calibration and slightly adjusts VDroop.
Level 2 Enables Load-Line Calibration and moderately adjusts VDroop.
Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the CPU.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
 ThisoptioniscongurableonlywhenCPU Vcore is set to Normal. The default is Auto.
QPI/Vtt Voltage
The default is Auto.
CPU PLL
The default is Auto.
>>> MCH/ICH
PCIE
The default is Auto.
QPI PLL
The default is Auto.
IOH Core
The default is Auto.
ICH I/O
The default is Auto.
ICH Core
The default is Auto.
>>> DRAM
DRAM Voltage
The default is Auto.
DRAM Termination
The default is Auto.
Ch-A Data VRef.
The default is Auto.
Ch-B Data VRef.
The default is Auto.
Ch-C Data VRef.
The default is Auto.
Ch-A Address VRef.
The default is Auto.
Ch-B Address VRef.
The default is Auto.
Ch-C Address VRef.
The default is Auto.