Gigabyte G292-Z20 - Page 36

System Hardware Installation - 36 -
For GPU3/GPU4/GPU5/GPU6
Follow these instructions to install the GPU card:
1. [For GPU5/GPU6] Loosen and remove the two screws securing the PCI cage at the top of the
system.
[For GPU2/GPU3] Loosen and remove the single screw at the top of the system and the two screws
at the rear of the system securing the PCI cage.
Pull the two plastic handles to lift up the PCI cage from the system.
2. Insert the card into the selected slot. Make sure that the card is properly seated.
3. Secure the GPU cards in place with two screws.
FRON
TRE
AR FRON
TRE
AR
Top: GPU6 (PCIE_2_PCIE_2)
Boom: GPU5 (PCIE_2_PCIE_1)
Top: GPU4 (PCIE_3_PCIE_2)
Boom: GPU3 (PCIE_3_PCIE_1)
Top: GPU6 (PCIE_2_PCIE_2)
Boom: GPU5 (PCIE_2_PCIE_1)
Top: GPU1 (PCIE_1_PCIE_1)
Boom: GPU2 (PCIE_1_PCIE_2)
Top: GPU7 (PCIE_4_PCIE_1)
Boom: : GPU8 (PCIE_4_PCIE_2)
FRON
TRE
AR FRON
TRE
AR
1