Gigabyte G482-Z53 - Page 89

- 89 - BIOS Setup
Parameter Description
Memory MBIST
Press [Enter] for more options

MBIST Enable
– Enable or disable Memory MBIST.
– Options available: Disabled/Enabled. Default option is Disabled.

Data Eye
– Press [Enter] for more options.
• Pattern Select
• Pattern Length
• Aggressor Channel
• Aggressor Static Lane Control
• Aggressor Static Lane Select Upper 32 bits
• Aggressor Static Lane Select Lower 32 bits
• Aggressor Static Lane Select ECC
• Aggressor Static Lane Value
• Target Static Lane Control
• Target Static Lane Select Upper 32 bits
• Target Static Lane Select Lower 32 bits
• Target Static Lane Select ECC
• Target Static Lane Value
• Data Eye Type
• Worst Case Margin Granularity
• Read Voltage Sweep Step Size
• Read Timing Sweep Step Size
• Write Voltage Sweep Step Size
• Write Timing Sweep Step Size