Gigabyte G492-Z52 - Page 12

- 12 -
Hardware Installation
Socket
Socket
Security
Security
Expansion Slot  10 x PCIe x16 slots (Gen4 x16 bus) for GPUs ( Broadcom solution)
 1 x PCIe x16 (Gen4 x16 bus) Half-length low-prole slot in front side
 1 x PCIe x16 (Gen4 x8 bus) Half-length low-prole slot in front side
 1 x PCIe x16 (Gen4 x16 bus) Half-length low-prole slot in rear side#
# Non-supported SAS Card with internal cable due to cable routing limitation
 1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 in rear side
- System is validated for population with a uniform GPU model
- Mixed GPU population is not supported.
Socket
Socket
Security
Security
Internal I/O
 1 x TPM header
 1 x Front VGA header
Socket
Socket
Security
Security
Front I/O  2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x Power button with LED
 1 x ID button with LED
 1 x Reset button
 1 x NMI button
 1 x System status LED
 1 x HDD access LED
Socket
Socket
Security
Security
Rear I/O
 N/A
Socket
Socket
Security
Security
Backplane I/O  Backplane PN: 9CBP20C5NR-00 12 ports
 Speed and bandwidth: SAS 12Gb/s, SATA 6Gb/s or PCIe Gen4 x4
Socket
Socket
Security
Security
TPM  1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010
Socket
Socket
Security
Security
Power Supply  3 x 2200W redundant PSUs
 80 PLUS Platinum
 AC Input:
- 100-127V~/ 14A, 47-63Hz
- 200-240V~/ 12.6A, 47-63Hz
 DC Output:
- Max 1200W/ 100-127V~
+12.12V/ 95.6A
+12Vsb/ 3.5A
- Max 2200W/ 200-240V
+12.12V/ 178.1A
+12Vsb/ 3.5A
NOTE: The system power supply requires C19 type power cord