- 36 -
System Hardware Installation
3-10-1 Liquid Cooling Specications
The cold plate assembly in the liquid cooling assembly mounts directly on top of the processors and GPU
card. The retention mechanism for installation on top of the processors is integrated into the cold plate. The
liquid coolant contained within the tubes, is a mixture of demineralized water and propylene glycol with the
following beneficial features: Anti-Freeze, Anti-Corrosion and Anti Bacterial. The following table lists the
features and specications of the liquid cooling assembly
Specication Value
Cold plate material
Copper
Thermal Interface Material
CPU Loop: DOW
CORNING TC-5026
GPU Loop: Honeywell PTM7900
NV Switch Loop: DOW
CORNING TC-5026
GPU heat spreader Thermal Interface Material
FUJIPOLY SARCON PG25A
FUJIPOLY SARCON XR-Pe
Operating liquid temperature
Minimum: 5°C
Maximum: 65°C
Operating air temperature 40°C
Coolant ow rate
CPU Loop: 1 L/min
GPU Loop: 2 L/min
NV switch Loop: 1 L/min
Operating humidity 9 - 95%
Storage temperature -20 to 80°C
Storage humidity 5 - 95%
Dimensions
Height 36.7mm
Weight CPU Loop: 750g
GPU Loop: 2500g
NV switch Loop: 2000g
To Next Page
Loading...
