System Hardware Installation
- 38 -
3-10 Removing the System from the Cabinet
Read the following guidelines before you begin to remove the system from the cabinet:
• Always turn off the computer and unplug the power cord from the power outlet before removing
the system from the cabinet.
• Disconnect all necessary cable connections.
• Place the system unit on a hydraulic working table.
• Failure to observe these warnings could result in personal injury or damage to the equipment.
Follow these instructions to remove the system from the cabinet:
1. Loosen the thumbnail screws on each side that secure the system.
2. Carefully pull out the system from the cabinet and stop at the security hook on the side of the
system.
3. Push the button to unlock.
4. Gently pull out the system from the cabinet and place it on a hydraulic working table.
1
1
1
1
2
3
3
To Next Page
Loading...
