12
GA-2CEWH Motherboard
Step1-2: Installing Cooling Fan
Step 1. Attach th cooling fan clip to the processor scoket. Align the heatsink assembly with the support
frame mating with the backer plate standoffs as shown in Figure 5&6.
Step 2. Coonect the processor fan cable to the processor fan connector.
Note: ** We recommend you to buy the kind of cooling fan which is shown in Figure 8. This type of cooling
fan will provide the best performance for heat releasing.
Figure 5&6 Alignment of Heatsink Assembly with Standoffs
Figure 7 Connecting CPU FAN connector
To Next Page
Loading...
