34
GA-2CEWH Motherboard
5 ) CLR_CMOS1 (Clear CMOS Function)
You may clear the CMOS data to its default values by this jumper.
Default value doesn’t include the “Shunter” to prevent from improper use this jumper. To
clear CMOS, temporarily short 1-2 pin.
1-2 close: Clear CMOS
2-3 close: Normal (Default)
1
1
6 ) BIOS_RE (BIOS Recovery Function)
1-2 close: Enable BIOS Recovery
function
2-3 close: Disable BIOS Recovery
function (Default)
1
1
To Next Page
Loading...
