Gigabyte GA-2CEWH - Parallel Port

57
BIOS Setup


Parallel Port
This allows users to configure parallel port by using this option.
Enabled Enable the configuration. (Default value)
Disabled Disable the configuration.
 Mode
This option allows user to set Parallel Port transfer mode.
EPP Using Parallel port as Enhanced Parallel Port. (Default)
Bi-directional Use this setting to support bi-directional transfers on the parallel port.
 ECP Using Parallel port as Extended Capabilities Port.
 Base I/O Address
378 Set IO address to 378. (Default value)
278 Set IO address to 278.
3BC Set IO address to 3BC.
 Interrupt
IRQ5 Set the Interrupt to IRQ5.
IRQ7 Set the Interrupt to IRQ7. (Default value)
 DMA Channel
DMA1 Select DMA1 as DMA channel.
DMA3 Select DMA3 as DMA channel.