9
Hardware Installation Process
Step 1-1: CPU Installation
00
00
0 If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause
improper installation. Please change the insert orientation.
CPU Top View
CPU Bottom View
1. Pull up the CPU socket level
and up to 90-degree angle.
2. Locate Pin 1 in the socket and look
for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.
For example: The newest Pentium III processor (FC-PGA2 package).
Step 1: Install the Central Processing Unit (CPU)
Socket Actuation Lever
Pin1 indicator
00
00
0 Please make sure the CPU type is supported by the motherboard.
To Next Page
Loading...
