Gigabyte GA-6OXT - Step 1-2: CPU Heat Sink Installation

10
GA-6OXT(-A) Motherboard
Step 1-2: CPU Heat Sink Installation
1.Press down the CPU socket
lever and finish CPU installation.
00
00
0Please use Intel approved cooling fan.
00
00
0We recommend you to apply the thermal paste to provide better heat
conduction between your CPU and heatsink.
00
00
0Make sure the CPU fan power cable is plugged in to the CPU fan connector,
this completes the installation.
00
00
0Please refer to CPU heat sink user’s manual for more detail installation procedure.
3.Fasten the heatsink supporting-base
onto the CPU socket on the main-
board.
2.Use qualified fan approved by Intel.
4.Make sure the CPU fan is plugged to
the CPU fan connector, than install
complete.