BIOS Setup - 42 -
PERR# Generation
When this item is set to enabled, PCI bus system error (SERR) is generated and is routed to NMI.
Options available: Enabled/Disabled. Default setting is Enabled.
SERR# Generation
When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI.
Options available: Enabled/Disabled. Default setting is Enabled.
PCI Express Slot 1/2/3/4 I/O ROM
When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot.
Options available: Enabled/Disabled. Default setting is Enabled.
2-2-6 PCIConguration
To Next Page
Loading...
