- 9 - Hardware Installation
Internal
Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
6 x SATA 3Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x NMI switch
1 x front panel header
1 x audio header*
3 x USB 2.0/1.1 headers
1 x serial port header
Back Panel
Connectors
6 x USB 2.0/1.1 ports (GA-6UASL1/2)
1 x RJ-45 port (GA-6UASL1)
2 x RJ-45 port (GA-6UASL2)
1 x COM port
1x VGA port
3 x audio jacks (Side Speaker Out/Line In/Line Out/Microphone)*Optional
I/O Controller iTE IT8728 chip
Hardware
Monitor
System voltage detection
CPU/System temperature detection
CPU/System/Power fan speed detection
CPU overheating warning
CPU/System/Power fan fail warning
CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on
the CPU/system cooler you install.
BIOS 1 x 64 Mbit ash
AMI BIOS
Form Factor Micro ATX Form Factor; 9.6 inch x 9.6 inch
* GIGABYTE reserves the right to make any changes to the product specications and product-related information
without prior notice.
To Next Page
Loading...
