Gigabyte GA-6VEM - Step1-3:CPU Heat Sink Installation

12
GA-6VEM Series Motherboard
Step1-3:CPU Heat Sink Installation
3. Fasten the heatsink supporting-base
onto the CPU socket on the main-
board.
2. Use qualified fan approved by Intel.
4. Make sure the CPU fan is
plugged to the CPU fan connector,
than install complete.
1. Press down the CPU socket
lever and finish CPU installation.
 Please use Intel approved cooling fan.
 We recommend you to apply the thermal paste to provide better heat
conduction between your CPU and heatsink.
 Make sure the CPU fan power cable is plugged in to the CPU fan connector,
this completes the installation.
 Please refer to CPU heat sink user’s manual for more detail installation
procedure.