Gigabyte GA-6VX7-4X - Celeron 300 A; 66 MHz FSB

6VX7-4X Motherboard
9
F For Auto Jumper setting:
SW1
ON
1
2
3
4
5
6
« Note:
1. If you use 66, 100, 133 MHz CPU, we recommend you to set up your system speed to
“Auto” value.
2. We don’t recommend you to set up your system speed to 112, 124, 142,152 MHz because
these frequencies are not the standard specifications for CPU, Chipset and most of the
peripherals. Whether your system can run under 112, 124, 142,152 MHz properly will
depend on your hardware configurations: CPU, SDRAM, Cards, etc.
1. Celeron
TM
300A / 66MHz FSB
SW2
ON
1
2
3
4
SW1
ON
1
2
3
4
5
6