BIOS Setup
64
Integrated Peripherals
Figure 9: Integrated Peripherals
•
OnBoard IDE
Disabled Disabled OnBoard IDE
Both Set OnBoard IDE is Both. (Default Value)
Primary Set OnBoard IDE is Primary.
Secondary Set OnBoard IDE is Secondary.
•
OnBoard FDC
Auto Set OnBoard FDC is Auto. (Default Value)
Disabled Disabled OnBoard FDC.
Enabled Enabled OnBoard FDC.
•
OnBoard Serial Port 1
Auto BIOS will automatically setup the port 1 address. (Default Value)
3F8/COM1 Enable onBoard Serial port 1 and address is 3F8.
2F8/COM2 Enable onBoard Serial port 1 and address is 2F8.
3E8/COM3 Enable onBoard Serial port 1 and address is 3E8.
2E8/COM4 Enable onBoard Serial port 1 and address is 2E8.
Disabled Disable onBoard Serial port 1.
AMIBIOS SETUP –INTEGRATED PERIPHERAL
( C ) 1999 American Megatrends, Inc. All Rights Reserved
OnBoard IDE :Both Game Port(200h-207h) :Enabled
OnBoard FDC :Auto
OnBoard Serial Port 1 :Auto
OnBoard Serial Port 2 :Auto
Serial Port 2 Mode :Normal
Duplex Mode :N/A
OnBoard Parallel Port :Auto
Parallel Port Mode :ECP
Parallel Port DMA :Auto
Parallel Port IRQ :Auto
OnBoard AC’97 Audio :Auto
OnBoard MC’97 Modem :Auto
Onboard Legacy Audio :Enabled
Sound Blaster :Disabled
SB I/O Base Address :220h-22Fh
SB IRQ Select :IRQ 5 ESC : Quit ↑↓←→: Select Item
SB DMA Select :DMA 1 F1 : Help PU/PD/+/- : Modify
MPU-401 :Disabled F5 : Old Values (Shift)F2 :Color
MPU-401 I/O Address :330h-333h F6 : Load BIOS Defaults
FM Port(388h-38Bh) :Disabled F7 : Load Setup Defaults