Appendix - 82 -
5-2-2 Conguring S/PDIF Out
The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio
quality.
(Note) Enter the Digital Output(RCA) screen to configure further settings if you use the S/PDIF Out connector
on the back panel for digital audio output or enter the Digital Output screen if you use the internal S/
PDIF Out connector (SPDIF_O) for digital audio output.
2. Configuring S/PDIF Out:
On the Digital Output(RCA) screen
(Note)
, click the Default Format tab and then select the sample rate and bit
depth. Click OK to complete.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF coaxial cable to the corresponding S/PDIF out connector as shown below and an external
decoder for transmitting the S/PDIF digital audio signals.
Connects to a S/PDIF coaxial cable
To Next Page
Loading...
