Gigabyte GA-78LMT-S2 - Standard CMOS Features

- 26 -
2-4 Standard CMOS Features
Normal CPU Vcore NB
Displays the normal operating voltage of your CPU North Bridge.
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Standard CMOS Features
Date (mm:dd:yy) Mon, Jul 23 2012
Time (hh:mm:ss) 22:31:24
 IDE Channel 0 Master [None]
 IDE Channel 0 Slave [None]
 IDE Channel 1 Master [None]
 IDE Channel 1 Slave [None]
 IDE Channel 2 Master [None]
 IDE Channel 2 Slave [None]
Halt On [All, But Keyboard]
Base Memory 640K
Extended Memory 766M
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level 
Date (mm:dd:yy)
Sets the system date.
Time (hh:mm:ss)
Sets the system time.
IDE Channel 0, 1 Master/Slave
IDE Channel 0, 1 Master/Slave
 CongureyourSATAdevicesbyusingoneofthethreemethodsbelow:
• None If no SATA devices are used, set this item to None so the system will skip the
detection of the device during the POST for faster system startup.
• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
Capacity Approximate capacity of the currently installed hard drive.
IDE Channel 2 Master/Slave
Extended IDE Drive
 CongureyourSATAdevicesbyusingoneofthetwomethodsbelow:
• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
• None If no SATA devices are used, set this item to None so the system will skip the
detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), Large.
Capacity Approximate capacity of the currently installed hard drive.
Halt On
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard". (Default)
Memory
 Theseeldsareread-onlyandaredeterminedbytheBIOSPOST.