Panel and Jumper Definition
18
JP16 /JP17/JP18: AMR (Primary or Secondary) Select (Optional)
(AMR
Æ
ÆÆ
Æ
Audio Modem Riser)
JP16 JP17 JP18
Onboard AC97 ON 1-2 1-2
AMR (Primary) OFF 3-4 3-4
Onboard AC97+MR
(Secondary)
(Default)
ON 1-2
3-4
1-2
1
JP17
1
JP16
1
JP18
JP4: Rear USB Device Wake up Selection (USB Connector
Æ
USB1)
Pin No. Definition
1-2 Close Normal (Default)
2-3 Close USB Device Wake up
1
(If you want to use "USB Dev Wakeup From S3-S5"
function, you have to set the BIOS setting "USB Dev
Wakeup From S3-S5" enabled, and the jumper "JP4"
enabled).
*(Power on the computer and as soon as memory
counting starts, press <Del>. You will enter BIOS Setup.
Select the item "POWER MANAGEMENT SETUP", then
select "USB Dev Wakeup From S3-S5: Enabled".
Remember to save the setting by pressing "ESC" and
choose the "SAVE & EXIT SETUP" option.)
USB1
To Next Page
Loading...
