SATA Hard Drives Configurations (Intel ICH6R)- 10 -
Figure 14
Figure 13
Step 5:
Insert an empty floppy disk and press 1 to select 1)Intel Application Accelerator 4.0. Then it will take
about one minute to copy the SATA driver from the motherboard driver CD to the floppy disk.
Step 6:
Press 0 to exit when the procedure is complete (Figure 14). You have copied the SATA driver sucessfully.
Step 4:
Double-click MENU.exe. An MS-DOS prompt screen similar to Figure 13 below will appear.
To Next Page
Loading...
