SATA Hard Drives Configurations (Intel ICH6R) - 4 -
Ác
Åé
¤¤
¤å
Step 2:
Later, select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk
Boot Priority submenu, select the model of the SATA hard drive onto which you intent to install Microsoft
Windows 2000/XP (Figure 2).
Figure 2
Step 4:
Save and exit BIOS Setup.
Figure 3
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Hard Disk Boot Priority
KL
``
K L
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced BIOS Features
`
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F3: Language F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
`
Step 3:
Set First Boot Device under the Advanced BIOS Features menu to CD-ROM to boot from CD-ROM
after system restarts (Figure 3).
To Next Page
Loading...
