SATA Hard Drives Configurations (Intel ICH6R)- 8 -
After the creation is completed, you can see detailed information about the RAID Array in the DISK/VOLUME
INFORMATION section, including RAID mode, disk block size, disk name, and disk capacity, etc.
To exit the ICH6R RAID BIOS utility, press ESC in Main Menu.
Now, you can proceed to the installation of the SATA driver and operating system.
Delete RAID Volume
If you want to delete a RAID volume, select the Delete RAID Volume option in Main Menu. Press ENTER
and follow on-screen instructions.
Figure 10
KL
KL
To Next Page
Loading...
