Hardware Installation- 31 -
English
19) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily
short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
Open: Normal
Short: Clear CMOS
1
1
20) PCIE_12V (Power Connector)
The PCIE_12V power connector supplies extra power to the PCIEx 16 slots. Connect this connector
depending on your system requirements.
1
PIin No. Definition
1NC
2 GND
3 GND
4 +12V
To Next Page
Loading...
