GA-8I945P Dual Graphic(-R) Motherboard - 82 -
English
6 Channel Audio Setup
STEP 3:
After plugging in 6-channel speakers to the rear
speaker jacks, a small window will pop up and ask
you what type of equipment is connected. Choose a
device depending on the type of speaker connected
(6-channel audio consists of Front Speaker Out (Line
Out), Rear Speaker Out, and Center/Subwoofer
Speaker Out) then click OK. The 6-channel audio
setup is completed.
STEP 2:
In the Audio Control Panel, click the Audio I/O tab. In
the upper left list, click 6CH Speaker.
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager icon in your system tray (you
can also find the icon in Control Panel). Double-click
the icon to open the Audio Control Panel.
8 Channel Audio Setup
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager icon in your system tray (you
can also find the icon in Control Panel). Double-click
the icon to open the Audio Control Panel.
To Next Page
Loading...
