Gigabyte GA-8I945PL-G - Page 24

GA-8I945PL-G Motherboard - 24 -
English
12) SPDIF_I (SPDIF In)
Use SPDIF IN feature only when your device has digital output function. Be careful with the polarity
of the SPDIF_IN connector. Check the pin assignment carefully while you connect the SPDIF
cable, incorrect connection between the cable and connector will make the device unable to work
or even damage it. For optional SPDIF cable, please contact your local dealer.
1
Pin No. Definition
1 Power
2 SPDIFI
3 GND
13) F_ USB/GREEN_USB (Front USB Connector)
Be careful with the polarity of the front USB connector. Check the pin assignments carefully while you
connect the front USB cable, incorrect connection between the cable and connector will make the
device unable to work or even damage it. For optional front USB cable, please contact your local dealer.
The GREEN_USB connector provides no standby power when system is off and it does not support
USB device to wake up from S3 mode. Users who wish to shut down the standby power
(note)
for their
USB devices during system power-off can connect the devices to this connector via the optional front
USB cable.
Pin No. Definition
1 Power
2 Power
3 USB DX-
4 USB Dy-
5 USB DX+
6 USB Dy+
7 GND
8 GND
9 No Pin
10 NC
(Note) When the standby power is shut down, USB devices (example: optical mouses) will not light
on during system power-off.
1
2
9
10