Gigabyte GA-8N-SLI Pro - Page 5

SATA Hard Drive Configurations (nForce series)- 5 -
Step 3:
To boot from Windows installation CD-ROM, set First Boot Device under the Advanced BIOS Features
menu to CD-ROM (Figure 4).
Step 4:
Save and exit BIOS Setup.
Figure 4
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Advanced BIOS Features
} Hard Disk Boot Priority [Press Enter]
First Boot Device [CD-ROM]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Boot Up Floppy Seek [Disabled]
Password Check [Setup]
Init Display First [PEG]
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level}
Select Hard Disk Boot
Device Priority