Gigabyte GA-8N-SLI - Page 5

SATA Configurations (P4 nForce4 SLI series)- 5 -
Step 3:
To boot from Windows installation CD-ROM, set First Boot Device under the Advanced BIOS Features
menu to CD-ROM (Figure 5).
Step 4:
Save and exit BIOS Setup.
Figure 5
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Advanced BIOS Features
} Hard Disk Boot Priority [Press Enter]
First Boot Device [CDROM]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
ROM Boot Priority [PROMISE]
Boot Up Floppy Seek [Disabled]
Password Check [Setup]
CPU Hyper-Threading
#
[Enabled]
Limit CPUID Max. to 3 [Disabled]
No-Execute Memory Protect [Enabled]
CPU Enhanced Halt (C1E) [Enabled]
CPU Thermal Monitor 2(TM2) [Enabled]
CPU EIST Function [Enabled]
Full Screen LOGO Show [Enabled]
Intel Onscreen Branding [Enabled]
Init Display First [PEG]
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F3: Language F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level}
Select Hard Disk Boot
Device Priority