Appendix- 71 -
English
Deleting RAID Volume
If you want to delete a RAID array, simply press D while you are in the window below (Figure 12).
Next, use the ARROW keys to select the RAID array you wish to delete and press ENTER. Finally,
when the "Are you sure to delete this RAID?" message appears, press Y to confirm your selections.
SiS RAID BIOS Setting Utility
RAID Setup
* Current Created Raid *
RAID 0 : Disk 1 Disk 2
Press [D] key to delete RAID
[Q] : Exit current menu
Location Model Capacity Mode RAID Type
Disk 1 ST3120026AS 111GB UDMA 6 RAID0
Disk 2 ST3120026AS 111GB UDMA 6 RAID0
Now, you can proceed to the installation of the SATA driver and operating system.
Figure 12
To Next Page
Loading...
