- 21 -
Hardware Installation Process
English
14) SPDIF (SPDIF)
The SPDIF output is capable of providing
digital audio to external speakers or
compressed AC3 data to an external Dolby
Digital Decoder. Use this feature only when
your stereo system has digital input function.
6 Channel output : A "S/PDIF output" connec-
tor is available on the motherboard. Please
contact your nearest dealer for optional SPDIF
cable.
Be careful with the polarity of the front USB
connector. Check the pin assignment while
you connect the front USB cable. Please
contact your nearest dealer for optional front
USB 2.0 cable.
15) F_USB1 / F_USB2 (Front USB Connector, Yellow)
17) CI (Case Open)
This 2-pin connector allows your system to
enable or disable the "Case Open" item in
BIOS, if the system case begin remove.
Please contact your nearest dealer for optional
Modem card.
16) MODEM*
1
2
13
14
VAUX33
+12V
NC
VDD33
VCC
AC DOUT
AC DIN
AC OUT
GND
NC
AC BCK
AC SYNC
AC RSTB
* Only for GA-8ST800-L.
VCC
SPDIF Out
GND
1
1
Signal
GND
1
2
9
10
GND
USB Dy+
USB Over Current
Power
USB Dy-
USB Dx+
GND
USB Dx-
Power
To Next Page
Loading...
