2-7 Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Frequency/Voltage Control
CPU Clock Ratio
[18X]
Item Help
O.C FSB 1333 Core. 2 CPU®
[Disabled] Menu Levels
CPU Host Clock Control
[Disabled] .
\ i PI' 11".: l'.с .'iic' . Mhz
2(V)
x PCI Е.чрго- I t..| . > Ai. •
System Memory Multiplier
[Auto]
Memory Frei|MBcy (Mhz)
Г>Г,7
DIMM OverVoltage Control®
[Normal]
FSB OverVoltage Control®
[Normal]
1
CPU Voltage Control®
[Normal]
Normal CPUЛ'сокф
! KM >Y
T4--X-: Move Enter: Select
+/-) PL PD: Value F10: Save
ESC: Exit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
CAUTION damages or shortened life expectancy to these components.
Please be aware that the menu items are for power users only.
c- CPU Clock Ratio <
Note
>
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable,
с- O.C FSB1333 Core 2 CPU ©
Enable use of a Core™ 2 CPU with 1333 MHz FSB through overclocking. You must install the
FSB 1333 MHz Core™ 2 CPU with DDR2 533 (or above) memory module(s).
•• Disabled Disable this function. (Default value)
•• Enabled Enable this function,
o- CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
» Disabled Disable CPU Host Clock Control. (Default value)
>• Enabled Enable CPU Host Clock Control.
^ CPU Host Frequency (Mhz)
» 100 - 600 Set CPU Host Frequency from 100 MHz to 600 MHz.
If you use a 533 MHz FSB processor, set "CPU Host Frequency" to 133 MHz.
If you use a 800 MHz FSB processor, set "CPU Host Frequency" to 200 MHz.
If you use a 1066 MHz FSB processor, set "CPU Host Frequency" to 266 MHz.
If you use a 1333 MHz FSB processor, set "CPU Host Frequency" to 333 MHz.
Incorrect using it may cause your system broken. For power End-User use only!
(Note) This item will show up when you install a processor which supports this function.
© Only for GA-945GCMX-S2.
- 47 -
BiOS Setup
To Next Page
Loading...
