STEP 3:
Connect the 4-channel speakers to the audio jacks
on the motherboard and the surround cable, a
small window will pop up and ask you what type
of equipment is connected. Choose a device de-
pending on the type of speaker connected (4-
channel audio consists of Front Speaker Out (Line
Out) and Rear Speaker Out) and then click OK.
The 4-channel audio setup is completed.
Setting Up 6-Channel Audio
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager §j| icon in your system tray
(you can also find the icon in Control Panel). Double-
click the icon to open the Audio Control Panel.
GA-945GCM(X)-S2 Motherboard
- 66 -
To Next Page
Loading...
