Drivers Installation- 53 -
English
Chapter 3 Drivers Installation
3-1 Installing Chipset Drivers
After inserting the driver disk, "Xpress Install" will automatically scan the system and then list all the
drivers that are recommended to install. Please select the item that you wish to install and press the
Install button following the item. Or you can press Xpress Install to install all the driver items.
• Before installing the drivers, first install the operating system. (The following instructions use
Windows XP as the example operating system.)
• After installing the operating system, insert the driver disk into your optional drive. The CD
Autorun screen is automatically displayed which looks like that shown in the screen shot
below. (If the CD Autorun screen does not appear automatically, go to My Computer,
double-click the optical drive and execute the Run.exe program.)
• Some device drivers will restart your system automatically during the driver installation.
After the system restart, Xpress Install will continue to install other drivers.
• After the drivers are installed, follow the onscreen instructions to restart your system. You
can install other applications included in the disk.
• For USB 2.0 driver support under the Windows XP operating system, please install the
Windows XP Service Pack 1 or later. After installing the SP1 (or later), if a question mark still
exists in Universal Serial Bus Controller in Device Manager, please remove the
question mark (by right-clicking your mouse and select Uninstall) and restart the system.
(The system will then autodetect and install the USB 2.0 driver.)
To Next Page
Loading...
