- 70 -GA-946GMX-S2 Motherboard
English
Step 2:
Click the Audio I/O tab. In the speaker list on the
left, select 2CH Speaker, 4CH Speaker, 6CH
Speaker, or 8CH Speaker according to the type of
speaker configuration you wish to set up.
Step 3:
Everytime you connect an audio device to an audio
jack, the Connected device box appears. Select the
device according to the type of device you connect.
Then click OK to complete the configuration.
A. Configuring Speakers:
(The following instructions use Windows XP as the example operating system.)
Step 1:
After installing the audio driver, the Audio
Manager icon will appear in your system tray.
Double-click the icon to access the Audio Control
Panel.
Before installing the audio driver, make sure the "Microsoft UAA Bus driver from High Defintion
Audio" has been installed from the motherboard driver CD-ROM and your operating system
has been updated with the latest Service Pack for Windows.
To Next Page
Loading...
